This package is 1.0 MB.
It is available at http://ftp.debian.org/debian/pool/main/s/slic3r/slic3r_1.1.7+dfsg-2+b1_amd64.deb
.
View its full control file here:
debian/control.
G-code generator for 3D printers
This package depends on:
libboost-geometry-utils-perl, libencode-locale-perl, libfile-spec-perl, libio-stringy-perl, libmath-convexhull-monotonechain-perl, libmath-geometry-voronoi-perl, libmath-planepath-perl, libmoo-perl, libstorable-perl, libtime-hires-perl, perl (>= 5.20.0-4), perlapi-5.20.0, libc6 (>= 2.14), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.9).
This package recommends:
libclass-xsaccessor-perl, libopengl-perl, libwx-perl, libwx-glcanvas-perl, libxml-sax-expatxs-perl, libpdf-api2-perl, libio-all-perl, libsvg-perl.
This package does not suggest any other package.
This package does not conflict with any other package.
slic3r 1.1.7+dfsg-2+b1 is in debian - jessie / main. This package's architecture is: amd64.
| File | Mime Type | Owner | Mode | Size |
|---|---|---|---|---|
/usr/
|
root:root | 0o755 | ||
/usr/bin/
|
root:root | 0o755 | ||
/usr/bin/amf-to-stl
|
text/x-perl | root:root | 0o755 | 1022 bytes |
/usr/bin/config-bundle-to-config
|
text/x-perl | root:root | 0o755 | 1.3 KB |
/usr/bin/dump-stl
|
text/x-perl | root:root | 0o755 | 1.1 KB |
/usr/bin/gcode_sectioncut
|
text/x-perl | root:root | 0o755 | 3.7 KB |
/usr/bin/pdf-slices
|
text/x-perl | root:root | 0o755 | 2.9 KB |
/usr/bin/slic3r
|
text/x-perl | root:root | 0o755 | 25.0 KB |
/usr/bin/split_stl
|
text/x-perl | root:root | 0o755 | 1.4 KB |
/usr/bin/stl-to-amf
|
text/x-perl | root:root | 0o755 | 1.8 KB |
/usr/bin/view-mesh
|
text/x-perl | root:root | 0o755 | 1.3 KB |
/usr/lib/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/auto/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/auto/Slic3r/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/auto/Slic3r/XS/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/auto/Slic3r/XS/XS.bs
|
application/x-empty | root:root | 0o644 | 0 bytes |
/usr/lib/x86_64-linux-gnu/perl5/5.20/auto/Slic3r/XS/XS.so
|
application/x-sharedlib | root:root | 0o644 | 2.0 MB |
/usr/lib/x86_64-linux-gnu/perl5/5.20/Slic3r/
|
root:root | 0o755 | ||
/usr/lib/x86_64-linux-gnu/perl5/5.20/Slic3r/XS.pm
|
text/plain | root:root | 0o644 | 4.7 KB |
/usr/share/
|
root:root | 0o755 | ||
/usr/share/applications/
|
root:root | 0o755 | ||
/usr/share/applications/slic3r.desktop
|
text/plain | root:root | 0o644 | 141 bytes |
/usr/share/doc/
|
root:root | 0o755 | ||
/usr/share/doc/slic3r/
|
root:root | 0o755 | ||
/usr/share/doc/slic3r/changelog.Debian.amd64.gz
|
application/gzip | root:root | 0o644 | 227 bytes |
/usr/share/doc/slic3r/changelog.Debian.gz
|
application/gzip | root:root | 0o644 | 1.1 KB |
/usr/share/doc/slic3r/copyright
|
text/plain | root:root | 0o644 | 57.8 KB |
/usr/share/doc/slic3r/examples/
|
root:root | 0o755 | ||
/usr/share/doc/slic3r/examples/post-processing/
|
root:root | 0o755 | ||
/usr/share/doc/slic3r/examples/post-processing/decimate.pl
|
text/x-perl | root:root | 0o755 | 868 bytes |
/usr/share/doc/slic3r/examples/post-processing/filament-weight.pl
|
text/x-perl | root:root | 0o755 | 915 bytes |
/usr/share/doc/slic3r/examples/post-processing/flowrate.pl
|
text/x-perl | root:root | 0o755 | 863 bytes |
/usr/share/doc/slic3r/examples/post-processing/prowl-notification.pl
|
text/x-perl | root:root | 0o755 | 616 bytes |
/usr/share/doc/slic3r/examples/post-processing/z-every-line.pl
|
text/x-perl | root:root | 0o755 | 589 bytes |
/usr/share/doc/slic3r/README.md.gz
|
application/gzip | root:root | 0o644 | 6.0 KB |
/usr/share/icons/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/128x128/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/128x128/apps/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/128x128/apps/slic3r.png
|
root:root | 0o777 | ||
/usr/share/icons/hicolor/192x192/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/192x192/apps/
|
root:root | 0o755 | ||
/usr/share/icons/hicolor/192x192/apps/slic3r.png
|
root:root | 0o777 | ||
/usr/share/man/
|
root:root | 0o755 | ||
/usr/share/man/man1/
|
root:root | 0o755 | ||
/usr/share/man/man1/amf-to-stl.1.gz
|
application/gzip | root:root | 0o644 | 343 bytes |
/usr/share/man/man1/dump-stl.1.gz
|
application/gzip | root:root | 0o644 | 222 bytes |
/usr/share/man/man1/gcode_sectioncut.1.gz
|
application/gzip | root:root | 0o644 | 337 bytes |
/usr/share/man/man1/pdf-slices.1.gz
|
application/gzip | root:root | 0o644 | 363 bytes |
/usr/share/man/man1/slic3r.1.gz
|
application/gzip | root:root | 0o644 | 4.5 KB |
/usr/share/man/man1/split_stl.1.gz
|
application/gzip | root:root | 0o644 | 254 bytes |
/usr/share/man/man1/stl-to-amf.1.gz
|
application/gzip | root:root | 0o644 | 276 bytes |
/usr/share/man/man1/view-mesh.1.gz
|
application/gzip | root:root | 0o644 | 252 bytes |
/usr/share/perl5/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Config.pm
|
text/plain | root:root | 0o644 | 14.4 KB |
/usr/share/perl5/Slic3r/ExPolygon.pm
|
text/plain | root:root | 0o644 | 1.1 KB |
/usr/share/perl5/Slic3r/Extruder.pm
|
text/plain | root:root | 0o644 | 1.5 KB |
/usr/share/perl5/Slic3r/ExtrusionLoop.pm
|
text/plain | root:root | 0o644 | 245 bytes |
/usr/share/perl5/Slic3r/ExtrusionPath/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/ExtrusionPath/Collection.pm
|
text/plain | root:root | 0o644 | 73 bytes |
/usr/share/perl5/Slic3r/ExtrusionPath.pm
|
text/plain | root:root | 0o644 | 411 bytes |
/usr/share/perl5/Slic3r/Fill/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Fill/ArchimedeanChords.pm
|
text/plain | root:root | 0o644 | 130 bytes |
/usr/share/perl5/Slic3r/Fill/Base.pm
|
text/plain | root:root | 0o644 | 2.2 KB |
/usr/share/perl5/Slic3r/Fill/Concentric.pm
|
text/plain | root:root | 0o644 | 2.5 KB |
/usr/share/perl5/Slic3r/Fill/Flowsnake.pm
|
text/plain | root:root | 0o644 | 335 bytes |
/usr/share/perl5/Slic3r/Fill/HilbertCurve.pm
|
text/plain | root:root | 0o644 | 120 bytes |
/usr/share/perl5/Slic3r/Fill/Honeycomb.pm
|
text/plain | root:root | 0o644 | 5.2 KB |
/usr/share/perl5/Slic3r/Fill/Line.pm
|
text/plain | root:root | 0o644 | 150 bytes |
/usr/share/perl5/Slic3r/Fill/OctagramSpiral.pm
|
text/plain | root:root | 0o644 | 155 bytes |
/usr/share/perl5/Slic3r/Fill/PlanePath.pm
|
text/plain | root:root | 0o644 | 1.6 KB |
/usr/share/perl5/Slic3r/Fill.pm
|
text/plain | root:root | 0o644 | 9.5 KB |
/usr/share/perl5/Slic3r/Fill/Rectilinear.pm
|
text/plain | root:root | 0o644 | 4.7 KB |
/usr/share/perl5/Slic3r/Flow.pm
|
text/plain | root:root | 0o644 | 304 bytes |
/usr/share/perl5/Slic3r/Format/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Format/AMF/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Format/AMF/Parser.pm
|
text/plain | root:root | 0o644 | 6.1 KB |
/usr/share/perl5/Slic3r/Format/AMF.pm
|
text/plain | root:root | 0o644 | 4.7 KB |
/usr/share/perl5/Slic3r/Format/OBJ.pm
|
text/plain | root:root | 0o644 | 880 bytes |
/usr/share/perl5/Slic3r/Format/STL.pm
|
text/plain | root:root | 0o644 | 880 bytes |
/usr/share/perl5/Slic3r/GCode/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/GCode/ArcFitting.pm
|
text/plain | root:root | 0o644 | 8.4 KB |
/usr/share/perl5/Slic3r/GCode/CoolingBuffer.pm
|
text/plain | root:root | 0o644 | 3.1 KB |
/usr/share/perl5/Slic3r/GCode/Layer.pm
|
text/plain | root:root | 0o644 | 10.8 KB |
/usr/share/perl5/Slic3r/GCode/MotionPlanner.pm
|
text/plain | root:root | 0o644 | 10.7 KB |
/usr/share/perl5/Slic3r/GCode/PlaceholderParser.pm
|
text/plain | root:root | 0o644 | 2.2 KB |
/usr/share/perl5/Slic3r/GCode.pm
|
text/plain | root:root | 0o644 | 28.1 KB |
/usr/share/perl5/Slic3r/GCode/Reader.pm
|
text/plain | root:root | 0o644 | 2.1 KB |
/usr/share/perl5/Slic3r/GCode/SpiralVase.pm
|
text/plain | root:root | 0o644 | 2.9 KB |
/usr/share/perl5/Slic3r/GCode/VibrationLimit.pm
|
text/plain | root:root | 0o644 | 2.1 KB |
/usr/share/perl5/Slic3r/Geometry/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Geometry/Clipper.pm
|
text/plain | root:root | 0o644 | 393 bytes |
/usr/share/perl5/Slic3r/Geometry.pm
|
text/plain | root:root | 0o644 | 22.8 KB |
/usr/share/perl5/Slic3r/GUI/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/GUI/AboutDialog.pm
|
text/plain | root:root | 0o644 | 3.8 KB |
/usr/share/perl5/Slic3r/GUI/ConfigWizard.pm
|
text/plain | root:root | 0o644 | 11.5 KB |
/usr/share/perl5/Slic3r/GUI/OptionsGroup.pm
|
text/plain | root:root | 0o644 | 17.9 KB |
/usr/share/perl5/Slic3r/GUI/Plater/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/GUI/Plater/ObjectCutDialog.pm
|
text/plain | root:root | 0o644 | 5.0 KB |
/usr/share/perl5/Slic3r/GUI/Plater/ObjectPartsPanel.pm
|
text/plain | root:root | 0o644 | 9.7 KB |
/usr/share/perl5/Slic3r/GUI/Plater/ObjectPreviewDialog.pm
|
text/plain | root:root | 0o644 | 858 bytes |
/usr/share/perl5/Slic3r/GUI/Plater/ObjectSettingsDialog.pm
|
text/plain | root:root | 0o644 | 5.5 KB |
/usr/share/perl5/Slic3r/GUI/Plater/OverrideSettingsPanel.pm
|
text/plain | root:root | 0o644 | 4.7 KB |
/usr/share/perl5/Slic3r/GUI/Plater.pm
|
text/plain | root:root | 0o644 | 55.7 KB |
/usr/share/perl5/Slic3r/GUI.pm
|
text/plain | root:root | 0o644 | 20.0 KB |
/usr/share/perl5/Slic3r/GUI/Preferences.pm
|
text/plain | root:root | 0o644 | 3.0 KB |
/usr/share/perl5/Slic3r/GUI/PreviewCanvas.pm
|
text/plain | root:root | 0o644 | 15.1 KB |
/usr/share/perl5/Slic3r/GUI/SimpleTab.pm
|
text/plain | root:root | 0o644 | 6.0 KB |
/usr/share/perl5/Slic3r/GUI/SkeinPanel.pm
|
text/plain | root:root | 0o644 | 20.1 KB |
/usr/share/perl5/Slic3r/GUI/Tab.pm
|
text/plain | root:root | 0o644 | 31.8 KB |
/usr/share/perl5/Slic3r/Layer/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Layer/BridgeDetector.pm
|
text/plain | root:root | 0o644 | 10.5 KB |
/usr/share/perl5/Slic3r/Layer.pm
|
text/plain | root:root | 0o644 | 2.6 KB |
/usr/share/perl5/Slic3r/Layer/Region.pm
|
text/plain | root:root | 0o644 | 24.1 KB |
/usr/share/perl5/Slic3r/Line.pm
|
text/plain | root:root | 0o644 | 402 bytes |
/usr/share/perl5/Slic3r/Model.pm
|
text/plain | root:root | 0o644 | 17.9 KB |
/usr/share/perl5/Slic3r.pm
|
text/plain | root:root | 0o644 | 6.0 KB |
/usr/share/perl5/Slic3r/Point.pm
|
text/plain | root:root | 0o644 | 156 bytes |
/usr/share/perl5/Slic3r/Polygon.pm
|
text/plain | root:root | 0o644 | 2.6 KB |
/usr/share/perl5/Slic3r/Polyline.pm
|
text/plain | root:root | 0o644 | 1.1 KB |
/usr/share/perl5/Slic3r/Print/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Print/Object.pm
|
text/plain | root:root | 0o644 | 46.4 KB |
/usr/share/perl5/Slic3r/Print.pm
|
text/plain | root:root | 0o644 | 46.6 KB |
/usr/share/perl5/Slic3r/Print/Region.pm
|
text/plain | root:root | 0o644 | 2.4 KB |
/usr/share/perl5/Slic3r/Print/Simple.pm
|
text/plain | root:root | 0o644 | 2.6 KB |
/usr/share/perl5/Slic3r/Print/State.pm
|
text/plain | root:root | 0o644 | 867 bytes |
/usr/share/perl5/Slic3r/Print/SupportMaterial.pm
|
text/plain | root:root | 0o644 | 36.6 KB |
/usr/share/perl5/Slic3r/Surface.pm
|
text/plain | root:root | 0o644 | 354 bytes |
/usr/share/perl5/Slic3r/SVG.pm
|
text/plain | root:root | 0o644 | 4.1 KB |
/usr/share/perl5/Slic3r/Test/
|
root:root | 0o755 | ||
/usr/share/perl5/Slic3r/Test.pm
|
text/plain | root:root | 0o644 | 92.5 KB |
/usr/share/perl5/Slic3r/Test/SectionCut.pm
|
text/plain | root:root | 0o644 | 6.5 KB |
/usr/share/perl5/Slic3r/TriangleMesh.pm
|
text/plain | root:root | 0o644 | 477 bytes |
/usr/share/slic3r/
|
root:root | 0o755 | ||
/usr/share/slic3r/add.png
|
image/png | root:root | 0o644 | 733 bytes |
/usr/share/slic3r/arrow_out.png
|
image/png | root:root | 0o644 | 594 bytes |
/usr/share/slic3r/arrow_rotate_anticlockwise.png
|
image/png | root:root | 0o644 | 608 bytes |
/usr/share/slic3r/arrow_rotate_clockwise.png
|
image/png | root:root | 0o644 | 602 bytes |
/usr/share/slic3r/arrow_up.png
|
image/png | root:root | 0o644 | 372 bytes |
/usr/share/slic3r/box.png
|
image/png | root:root | 0o644 | 555 bytes |
/usr/share/slic3r/brick_add.png
|
image/png | root:root | 0o644 | 729 bytes |
/usr/share/slic3r/brick_delete.png
|
image/png | root:root | 0o644 | 745 bytes |
/usr/share/slic3r/brick_go.png
|
image/png | root:root | 0o644 | 790 bytes |
/usr/share/slic3r/brick.png
|
image/png | root:root | 0o644 | 452 bytes |
/usr/share/slic3r/bricks.png
|
image/png | root:root | 0o644 | 825 bytes |
/usr/share/slic3r/building.png
|
image/png | root:root | 0o644 | 556 bytes |
/usr/share/slic3r/bullet_black.png
|
image/png | root:root | 0o644 | 211 bytes |
/usr/share/slic3r/bullet_blue.png
|
image/png | root:root | 0o644 | 289 bytes |
/usr/share/slic3r/bullet_white.png
|
image/png | root:root | 0o644 | 201 bytes |
/usr/share/slic3r/cog_go.png
|
image/png | root:root | 0o644 | 859 bytes |
/usr/share/slic3r/cog.png
|
image/png | root:root | 0o644 | 512 bytes |
/usr/share/slic3r/cross.png
|
image/png | root:root | 0o644 | 655 bytes |
/usr/share/slic3r/delete.png
|
image/png | root:root | 0o644 | 715 bytes |
/usr/share/slic3r/disk.png
|
image/png | root:root | 0o644 | 620 bytes |
/usr/share/slic3r/error.png
|
image/png | root:root | 0o644 | 666 bytes |
/usr/share/slic3r/funnel.png
|
image/png | root:root | 0o644 | 547 bytes |
/usr/share/slic3r/hourglass.png
|
image/png | root:root | 0o644 | 744 bytes |
/usr/share/slic3r/layers.png
|
image/png | root:root | 0o644 | 597 bytes |
/usr/share/slic3r/note.png
|
image/png | root:root | 0o644 | 500 bytes |
/usr/share/slic3r/package_green.png
|
image/png | root:root | 0o644 | 896 bytes |
/usr/share/slic3r/package.png
|
image/png | root:root | 0o644 | 853 bytes |
/usr/share/slic3r/page_white_go.png
|
image/png | root:root | 0o644 | 612 bytes |
/usr/share/slic3r/plugin.png
|
image/png | root:root | 0o644 | 591 bytes |
/usr/share/slic3r/printer_empty.png
|
image/png | root:root | 0o644 | 350 bytes |
/usr/share/slic3r/shading.png
|
image/png | root:root | 0o644 | 225 bytes |
/usr/share/slic3r/shape_ungroup.png
|
image/png | root:root | 0o644 | 666 bytes |
/usr/share/slic3r/Slic3r_128px.png
|
image/png | root:root | 0o644 | 19.2 KB |
/usr/share/slic3r/Slic3r_192px.png
|
image/png | root:root | 0o644 | 32.5 KB |
/usr/share/slic3r/Slic3r_192px_transparent.png
|
image/png | root:root | 0o644 | 24.9 KB |
/usr/share/slic3r/Slic3r.icns
|
image/x-icns | root:root | 0o644 | 241.8 KB |
/usr/share/slic3r/Slic3r.ico
|
image/x-icon | root:root | 0o644 | 344.8 KB |
/usr/share/slic3r/Slic3r.png
|
image/png | root:root | 0o644 | 24.8 KB |
/usr/share/slic3r/spool.png
|
image/png | root:root | 0o644 | 1.3 KB |
/usr/share/slic3r/tag_blue.png
|
image/png | root:root | 0o644 | 586 bytes |
/usr/share/slic3r/time.png
|
image/png | root:root | 0o644 | 793 bytes |
/usr/share/slic3r/wrench.png
|
image/png | root:root | 0o644 | 610 bytes |
/usr/share/zsh/
|
root:root | 0o755 | ||
/usr/share/zsh/vendor-completions/
|
root:root | 0o755 | ||
/usr/share/zsh/vendor-completions/_slic3r
|
text/plain | root:root | 0o644 | 9.7 KB |
