/usr/include/idas/idas

/*
 * -----------------------------------------------------------------
 * $Revision: 1.12 $
 * $Date: 2010/12/01 22:15:15 $
 * ----------------------------------------------------------------- 
 * Programmers: Radu Serban @ LLNL
 * -----------------------------------------------------------------
 * Copyright (c) 2002, The Regents of the University of California  
 * Produced at the Lawrence Livermore National Laboratory
 * All rights reserved
 * For details, see the LICENSE file
 * -----------------------------------------------------------------
 * This is the common header file for the Scaled and Preconditioned
 * Iterative Linear Solvers in IDAS.
 * -----------------------------------------------------------------
 */

#ifndef _IDASSPILS_H
#define _IDASSPILS_H

#ifdef __cplusplus  /* wrapper to enable C++ usage */
extern "C" {
#endif

#include <sundials/sundials_iterative.h>
#include <sundials/sundials_nvector.h>

/* 
 * -----------------------------------------------------------------
 * IDASPILS return values 
 * -----------------------------------------------------------------
 */

#define IDASPILS_SUCCESS     0
#define IDASPILS_MEM_NULL   -1 
#define IDASPILS_LMEM_NULL  -2 
#define IDASPILS_ILL_INPUT  -3
#define IDASPILS_MEM_FAIL   -4
#define IDASPILS_PMEM_NULL  -5

/* Return values for the adjoint module */

#define IDASPILS_NO_ADJ          -101
#define IDASPILS_LMEMB_NULL      -102

/* 
 * -----------------------------------------------------------------
 * PART I - forward problems
 * -----------------------------------------------------------------
 */

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsPrecSetupFn
 * -----------------------------------------------------------------
 * The optional user-supplied functions PrecSetup and PrecSolve
 * together must define the left preconditoner matrix P
 * approximating the system Jacobian matrix
 *    J = dF/dy + c_j*dF/dy'
 * (where the DAE system is F(t,y,y') = 0), and solve the linear
 * systems P z = r.   PrecSetup is to do any necessary setup
 * operations, and PrecSolve is to compute the solution of
 * P z = r.
 *
 * The preconditioner setup function PrecSetup is to evaluate and
 * preprocess any Jacobian-related data needed by the
 * preconditioner solve function PrecSolve.  This might include
 * forming a crude approximate Jacobian, and performing an LU
 * factorization on it.  This function will not be called in
 * advance of every call to PrecSolve, but instead will be called
 * only as often as necessary to achieve convergence within the
 * Newton iteration.  If the PrecSolve function needs no
 * preparation, the PrecSetup function can be NULL.
 *
 * Each call to the PrecSetup function is preceded by a call to
 * the system function res with the same (t,y,y') arguments.
 * Thus the PrecSetup function can use any auxiliary data that is
 * computed and saved by the res function and made accessible
 * to PrecSetup.
 *
 * A preconditioner setup function PrecSetup must have the
 * prototype given below.  Its parameters are as follows:
 *
 * tt  is the current value of the independent variable t.
 *
 * yy  is the current value of the dependent variable vector,
 *     namely the predicted value of y(t).
 *
 * yp  is the current value of the derivative vector y',
 *     namely the predicted value of y'(t).
 *
 * rr  is the current value of the residual vector F(t,y,y').
 *
 * c_j is the scalar in the system Jacobian, proportional to 1/hh.
 *
 * user_data is a pointer to user data, the same as the user_data
 *     parameter passed to IDASetUserData.
 *
 * tmp1, tmp2, tmp3 are pointers to vectors of type N_Vector
 *     which can be used by an IDASpilsPrecSetupFn routine
 *     as temporary storage or work space.
 *
 * NOTE: If the user's preconditioner needs other quantities,
 *     they are accessible as follows: hcur (the current stepsize)
 *     and ewt (the error weight vector) are accessible through
 *     IDAGetCurrentStep and IDAGetErrWeights, respectively (see
 *     ida.h). The unit roundoff is available as
 *     UNIT_ROUNDOFF defined in sundials_types.h
 *
 * The IDASpilsPrecSetupFn should return
 *     0 if successful,
 *     a positive int if a recoverable error occurred, or
 *     a negative int if a nonrecoverable error occurred.
 * In the case of a recoverable error return, the integrator will
 * attempt to recover by reducing the stepsize (which changes cj).
 * -----------------------------------------------------------------
 */

typedef int (*IDASpilsPrecSetupFn)(realtype tt,
				   N_Vector yy, N_Vector yp, N_Vector rr,
				   realtype c_j, void *user_data,
				   N_Vector tmp1, N_Vector tmp2,
				   N_Vector tmp3);

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsPrecSolveFn
 * -----------------------------------------------------------------
 * The optional user-supplied function PrecSolve must compute a
 * solution to the linear system P z = r, where P is the left
 * preconditioner defined by the user.  If no preconditioning
 * is desired, pass NULL for PrecSolve to IDASp*.
 *
 * A preconditioner solve function PrecSolve must have the
 * prototype given below.  Its parameters are as follows:
 *
 * tt is the current value of the independent variable t.
 *
 * yy is the current value of the dependent variable vector y.
 *
 * yp is the current value of the derivative vector y'.
 *
 * rr is the current value of the residual vector F(t,y,y').
 *
 * rvec is the input right-hand side vector r.
 *
 * zvec is the computed solution vector z.
 *
 * c_j is the scalar in the system Jacobian, proportional to 1/hh.
 *
 * delta is an input tolerance for use by PrecSolve if it uses an
 *     iterative method in its solution.   In that case, the
 *     the residual vector r - P z of the system should be
 *     made less than delta in weighted L2 norm, i.e.,
 *            sqrt [ Sum (Res[i]*ewt[i])^2 ] < delta .
 *     Note: the error weight vector ewt can be obtained
 *     through a call to the routine IDAGetErrWeights.
 *
 * user_data is a pointer to user data, the same as the user_data
 *     parameter passed to IDASetUserData.
 *
 * tmp is an N_Vector which can be used by the PrecSolve
 *     routine as temporary storage or work space.
 *
 * The IDASpilsPrecSolveFn should return
 *     0 if successful,
 *     a positive int if a recoverable error occurred, or
 *     a negative int if a nonrecoverable error occurred.
 * Following a recoverable error, the integrator will attempt to
 * recover by updating the preconditioner and/or reducing the
 * stepsize.
 * -----------------------------------------------------------------
 */

typedef int (*IDASpilsPrecSolveFn)(realtype tt,
				   N_Vector yy, N_Vector yp, N_Vector rr,
				   N_Vector rvec, N_Vector zvec,
				   realtype c_j, realtype delta, void *user_data,
				   N_Vector tmp);

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsJacTimesVecFn
 * -----------------------------------------------------------------
 * The user-supplied function jtimes is to generate the product
 * J*v for given v, where J is the Jacobian matrix
 *    J = dF/dy + c_j*dF/dy'
 *  or an approximation to it, and v is a given vector.
 * It should return 0 if successful and a nonzero int otherwise.
 *
 * A function jtimes must have the prototype given below. Its
 * parameters are as follows:
 *
 *   tt   is the current value of the independent variable.
 *
 *   yy   is the current value of the dependent variable vector,
 *        namely the predicted value of y(t).
 *
 *   yp   is the current value of the derivative vector y',
 *        namely the predicted value of y'(t).
 *
 *   rr   is the current value of the residual vector F(t,y,y').
 *
 *   v    is the N_Vector to be multiplied by J.
 *
 *   Jv   is the output N_Vector containing J*v.
 *
 *   c_j  is the scalar in the system Jacobian, proportional
 *        to 1/hh.
 *
 *   user_data is a pointer to user data, the same as the
 *        pointer passed to IDASetUserData.
 *
 *   tmp1, tmp2 are two N_Vectors which can be used by Jtimes for
 *         work space.
 * -----------------------------------------------------------------
 */

typedef int (*IDASpilsJacTimesVecFn)(realtype tt,
				     N_Vector yy, N_Vector yp, N_Vector rr,
				     N_Vector v, N_Vector Jv,
				     realtype c_j, void *user_data,
				     N_Vector tmp1, N_Vector tmp2);


/*
 * -----------------------------------------------------------------
 * Optional inputs to the IDASPILS linear solver                  
 * -----------------------------------------------------------------
 *                                                                
 * IDASpilsSetPreconditioner specifies the PrecSetup and PrecSolve 
 *           functions, as well as a pointer to user preconditioner 
 *           data. This pointer is passed to PrecSetup and PrecSolve
 *           every time these routines are called.
 *           Default is NULL for al three arguments.
 * IDASpilsSetJacTimesVecFn specifies the jtimes function.        
 *           Default is to use an internal finite difference      
 *           approximation routine.                          
 * IDASpilsSetGSType specifies the type of Gram-Schmidt           
 *           orthogonalization to be used. This must be one of    
 *           the two enumeration constants MODIFIED_GS or         
 *           CLASSICAL_GS defined in iterativ.h. These correspond 
 *           to using modified Gram-Schmidt and classical         
 *           Gram-Schmidt, respectively.                          
 *           Default value is MODIFIED_GS.                        
 *           Only for IDASPGMR.
 * IDASpilsSetMaxRestarts specifies the maximum number of restarts
 *           to be used in the GMRES algorithm.  maxrs must be a  
 *           non-negative integer.  Pass 0 to specify no restarts.
 *           Default is 5.                                        
 *           Only for IDASPGMR.
 * IDASpbcgSetMaxl specifies the maximum Krylov subspace size. 
 *           Default is 5.
 *           Only for IDASPBCG and IDASPTFQMR.
 * IDASpilsSetEpsLin specifies the factor in the linear iteration 
 *           convergence test constant.                           
 *           Default is 0.05                                      
 * IDASpilsSetIncrementFactor specifies a factor in the increments
 *           to yy used in the difference quotient approximations 
 *           to matrix-vector products Jv.                        
 *           Default is 1.0                                       
 *                                                                
 * The return value of IDASpilsSet* is one of:
 *    IDASPILS_SUCCESS   if successful
 *    IDASPILS_MEM_NULL  if the IDAS memory was NULL
 *    IDASPILS_LMEM_NULL if the linear solver memory was NULL
 * -----------------------------------------------------------------
 */

SUNDIALS_EXPORT int IDASpilsSetPreconditioner(void *ida_mem,
                                              IDASpilsPrecSetupFn pset, 
					      IDASpilsPrecSolveFn psolve);
SUNDIALS_EXPORT int IDASpilsSetJacTimesVecFn(void *ida_mem,
                                             IDASpilsJacTimesVecFn jtv);

SUNDIALS_EXPORT int IDASpilsSetGSType(void *ida_mem, int gstype);
SUNDIALS_EXPORT int IDASpilsSetMaxRestarts(void *ida_mem, int maxrs);
SUNDIALS_EXPORT int IDASpilsSetMaxl(void *ida_mem, int maxl);
SUNDIALS_EXPORT int IDASpilsSetEpsLin(void *ida_mem, realtype eplifac);
SUNDIALS_EXPORT int IDASpilsSetIncrementFactor(void *ida_mem, realtype dqincfac);

/*
 * -----------------------------------------------------------------
 * Optional outputs from the IDASPILS linear solver               
 *----------------------------------------------------------------
 *                                                                
 * IDASpilsGetWorkSpace returns the real and integer workspace used 
 *     by IDASPILS.                                                  
 * IDASpilsGetNumPrecEvals returns the number of preconditioner   
 *     evaluations, i.e. the number of calls made to PrecSetup    
 *     with jok==FALSE.                                           
 * IDASpilsGetNumPrecSolves returns the number of calls made to   
 *     PrecSolve.                                                 
 * IDASpilsGetNumLinIters returns the number of linear iterations.
 * IDASpilsGetNumConvFails returns the number of linear           
 *     convergence failures.                                      
 * IDASpilsGetNumJtimesEvals returns the number of calls to jtimes
 * IDASpilsGetNumResEvals returns the number of calls to the user 
 *     res routine due to finite difference Jacobian times vector 
 *     evaluation.                                                
 * IDASpilsGetLastFlag returns the last error flag set by any of
 *     the IDASPILS interface functions.
 *                                                                
 * The return value of IDASpilsGet* is one of:
 *    IDASPILS_SUCCESS   if successful
 *    IDASPILS_MEM_NULL  if the IDAS memory was NULL
 *    IDASPILS_LMEM_NULL if the linear solver memory was NULL
 * -----------------------------------------------------------------
 */                                                                

SUNDIALS_EXPORT int IDASpilsGetWorkSpace(void *ida_mem, long int *lenrwLS, long int *leniwLS);
SUNDIALS_EXPORT int IDASpilsGetNumPrecEvals(void *ida_mem, long int *npevals);
SUNDIALS_EXPORT int IDASpilsGetNumPrecSolves(void *ida_mem, long int *npsolves);
SUNDIALS_EXPORT int IDASpilsGetNumLinIters(void *ida_mem, long int *nliters);
SUNDIALS_EXPORT int IDASpilsGetNumConvFails(void *ida_mem, long int *nlcfails);
SUNDIALS_EXPORT int IDASpilsGetNumJtimesEvals(void *ida_mem, long int *njvevals);
SUNDIALS_EXPORT int IDASpilsGetNumResEvals(void *ida_mem, long int *nrevalsLS); 
SUNDIALS_EXPORT int IDASpilsGetLastFlag(void *ida_mem, long int *flag);


/*
 * -----------------------------------------------------------------
 * The following function returns the name of the constant 
 * associated with a IDASPILS return flag
 * -----------------------------------------------------------------
 */
  
SUNDIALS_EXPORT char *IDASpilsGetReturnFlagName(long int flag);


/* 
 * -----------------------------------------------------------------
 * PART II - backward problems
 * -----------------------------------------------------------------
 */

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsPrecSetupFnB
 * -----------------------------------------------------------------
 * A function PrecSetupB for the adjoint (backward) problem must have 
 * the prototype given below.
 * -----------------------------------------------------------------
 */
typedef int (*IDASpilsPrecSetupFnB)(realtype tt, 
				    N_Vector yy, N_Vector yp,
				    N_Vector yyB, N_Vector ypB, N_Vector rrB, 
				    realtype c_jB, void *user_dataB,
				    N_Vector tmp1B, N_Vector tmp2B, 
				    N_Vector tmp3B);

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsPrecSolveFnB
 * -----------------------------------------------------------------
 * A function PrecSolveB for the adjoint (backward) problem  must 
 * have the prototype given below.
 * -----------------------------------------------------------------
 */

typedef int (*IDASpilsPrecSolveFnB)(realtype tt, 
				    N_Vector yy, N_Vector yp,
				    N_Vector yyB, N_Vector ypB, N_Vector rrB, 
				    N_Vector rvecB, N_Vector zvecB,
				    realtype c_jB, realtype deltaB,
				    void *user_dataB, N_Vector tmpB);

/*
 * -----------------------------------------------------------------
 * Type : IDASpilsJacTimesVecFnB
 * -----------------------------------------------------------------
 * A function jtimesB for the adjoint (backward) problem must have 
 * the prototype given below.
 * -----------------------------------------------------------------
 */

typedef int (*IDASpilsJacTimesVecFnB)(realtype t,
				      N_Vector yy, N_Vector yp,
				      N_Vector yyB, N_Vector ypB, N_Vector rrB,
				      N_Vector vB, N_Vector JvB, 
				      realtype c_jB, void *user_dataB, 
				      N_Vector tmp1B, N_Vector tmp2B);

/*
 * -----------------------------------------------------------------
 * Functions
 * -----------------------------------------------------------------
 */

SUNDIALS_EXPORT int IDASpilsSetGSTypeB(void *ida_mem, int which, int gstypeB);

SUNDIALS_EXPORT int IDASpilsSetMaxRestartsB(void *ida_mem, int which, int maxrsB);

SUNDIALS_EXPORT int IDASpilsSetEpsLinB(void *ida_mem, int which, realtype eplifacB);

SUNDIALS_EXPORT int IDASpilsSetMaxlB(void *ida_mem, int which, int maxlB);

SUNDIALS_EXPORT int IDASpilsSetIncrementFactorB(void *ida_mem, int which, 
                                                realtype dqincfacB);

SUNDIALS_EXPORT int IDASpilsSetPreconditionerB(void *ida_mem, int which,
                                               IDASpilsPrecSetupFnB psetB,
					       IDASpilsPrecSolveFnB psolveB);
SUNDIALS_EXPORT int IDASpilsSetJacTimesVecFnB(void *ida_mem, int which,
                                              IDASpilsJacTimesVecFnB jtvB);



#ifdef __cplusplus
}
#endif

#endif
libsundials-serial-dev 2.5.0-3+b3 / usr / include / idas / idas_spils.h
