tgt 1:1.0.72-1ubuntu1 / usr / sbin / tgt-setup-lun

#!/bin/bash

# LUN assignment script
#
# Copyright (C) 2007 Erez Zilber <erezz@voltaire.com>
# Copyright (C) 2012 Roi Dayan <roid@mellanox.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation, version 2 of the
# License.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
# 02110-1301 USA

usage()
{
	name=$(basename $0);
	echo "usage:";
	echo -e "\t$name -n tgt_name -d dev -b bs_name -B block_size -t transport -C control_port [initiator_IP1 initiator_IP2 ...]";
	echo "defaults:";
	echo -e "\tbacking store: rdwr";
	echo -e "\ttransport: iscsi";
	echo -e "\tinitiator: ALL";
	echo -e "\tcontrol port: -";
	echo "examples:";
	echo -e "\t$name -n tgt-1 -d /dev/sdb1 192.168.1.2";
	echo -e "\t$name -n tgt-2 -d /tmp/null -b null -t iser";
	echo -e "\t$name -n tgt-3 -d ~/disk3.bin -b rdwr 192.168.1.2 192.168.1.3";
	echo -e "WARNING:"
	echo -e "\tPlease remember to set blocksize to 4096 for newer Advanced Format (4K) disks larger than 2TB. Otherwise, your existing filesystems will not be readable."
}

verify_params()
{
	if ! [ "$dev" -o "$bs_type" == "null" ]; then
		echo "Error: a device is mandatory";
		exit 1;
	else
		return;
	fi

	# Make sure that the device exists
	if ! [ -b $dev -o -f $dev -o -c $dev ]; then
		echo "Error: $dev is not a device";
		exit 1;
	fi

	if ! [ "$tgt_name" ]; then
		echo "Error: target name is mandatory";
		exit 1;
	fi

	if ! [ "$lld_name" ]; then
		echo "Error: lld name empty";
		exit 1;
	fi
}

find_vacant_tgt_id()
{
	id_list=$($TGTADM --lld $lld_name --op show --mode target | grep Target | cut -d" " -f2 | sed s/://)

	next_vacant_id=1

	for id in $id_list; do
		if (($id > $next_vacant_id)); then
			break;
		else
			next_vacant_id=$((next_vacant_id+1))
		fi
	done

	return $next_vacant_id
}

find_vacant_lun()
{
	tid=$1
	tgt_found=0
	next_vacant_lun=0
	tmp_file=/tmp/target_list.txt

	$TGTADM --lld $lld_name --op show --mode target > $tmp_file

	while read line; do
		# Check if we finished going over this target
		if ((tgt_found == 1 && $(echo $line | grep -c "^Target") == 1)); then
			break
		fi

		# Check if we found the requested target
		if (($(echo $line | grep -c "Target $tid:") == 1)); then
			tgt_found=1
			continue
		fi

		if ((tgt_found == 1 && $(echo $line | grep -c "LUN:") == 1)); then
			curr_lun=$(echo $line | cut -d" " -f2)
			if (($curr_lun > $next_vacant_lun)); then
				break
			else
				next_vacant_lun=$((next_vacant_lun+1))
			fi
		fi
	done < $tmp_file

	rm -f $tmp_file

	if ((tgt_found == 0)); then
		echo "Error: could not find a LUN for target $tid"
		return -1
	fi

	return $next_vacant_lun
}

get_acl() {
	tid=$1
	tgt_found=0
	acl_found=0
	next_vacant_lun=0
	tmp_file=/tmp/target_list.txt
	local _acl=""

	$TGTADM --lld $lld_name --op show --mode target > $tmp_file

	while read line; do
		# Check if we finished going over this target
		if ((tgt_found == 1 && $(echo $line | grep -c "^Target") == 1)); then
			break
		fi

		# Check if we found the requested target
		if (($(echo $line | grep -c "Target $tid:") == 1)); then
			tgt_found=1
			continue
		fi

		if ((tgt_found == 1 && $(echo $line | grep -c "ACL information") == 1)); then
			acl_found=1
			continue
		fi

		if ((tgt_found == 1 && acl_found == 1)); then
			curr_acl=$(echo $line)
			_acl=`echo $_acl $curr_acl`
		fi
	done < $tmp_file

	rm -f $tmp_file

	echo $_acl
}

err_exit()
{
	if ((new_tgt == 0)); then
		exit 1
	fi

	echo "Deleting new target, tid=$tid"
	$TGTADM --lld $lld_name --op delete --mode target --tid $tid
	res=$?

	if [ $res -ne 0 ]; then
		echo "Error: failed to delete target, tid=$tid"
	fi

	exit 1
}

check_if_tgt_exists()
{
	tgt_list=$($TGTADM --lld $lld_name --op show --mode target | grep Target | cut -d" " -f3)

	for curr_tgt in $tgt_list; do
		if [ $tgt_name = $curr_tgt ]; then
			return 1
		fi
	done

	return 0
}

if [ $# -eq 0 ]; then
	usage
	exit 1
fi

TGTADM="tgtadm"
lld_name="iscsi"
control_port=""

while getopts "d:n:b:B:t:h:C:" opt
do
	case ${opt} in
	d)
		dev=$OPTARG;;
	n)
		tgt_name=$OPTARG;;
	b)
		bs_type=$OPTARG;;
	B)
		block_size=$OPTARG;;
	t)
		lld_name=$OPTARG;;
        C)
                control_port=$OPTARG;;
	h*)
		usage
		exit 1
	esac
done

shift $(($OPTIND - 1))

initiators=$*

verify_params

# Check if tgtd is running (we should have 2 daemons)
tgtd_count=`pidof tgtd | wc -w`
if [ $tgtd_count -lt 1 ]; then
	echo "tgtd is not running"
	echo "Exiting..."
	exit 1
fi

if [ -n "$control_port" ]; then
    echo "Control port: $control_port"
    TGTADM="$TGTADM -C $control_port"
fi

echo "Using transport: $lld_name"

if ! [[ $tgt_name =~ ^iqn ]]; then
    tgt_name="iqn.2001-04.com.$(hostname -s)-$tgt_name"
fi

# Make sure that a target with the same name doesn't exist
check_if_tgt_exists
if [ $? -eq 1 ]; then
	echo "Error: target named $tgt_name already exists"
	read -p "Add a new lun to the existing target? (yes/NO): " add_lun
	if [ "$add_lun" != "yes" ]; then
		exit 1
	fi
	tid=$($TGTADM --lld $lld_name --op show --mode target | grep $tgt_name | cut -d" " -f2)
	tid=${tid%:}
	new_tgt=0
else
	find_vacant_tgt_id
	tid=$?

	# Create the new target
	echo "Creating new target (name=$tgt_name, tid=$tid)"
	$TGTADM --lld $lld_name --op new --mode target --tid $tid -T $tgt_name
	res=$?

	if [ $res -ne 0 ]; then
		echo "Error: failed to create target (name=$tgt_name, tid=$tid)"
		exit 1
	fi
	new_tgt=1
fi

find_vacant_lun $tid
lun=$?

# Add a logical unit to the target
echo "Adding a logical unit ($dev) to target, tid=$tid"
if [ $bs_type ]; then
	echo "Setting backing store type: $bs_type"
	bs_opt="-E $bs_type"
fi
if [ $block_size ]; then
	blksize_opt="--blocksize $block_size"
fi
$TGTADM --lld $lld_name --op new --mode logicalunit --tid $tid --lun $lun -b $dev $bs_opt $blksize_opt
res=$?

if [ $res -ne 0 ]; then
	echo "Error: failed to add a logical unit ($dev) to target, tid=$tid"
	err_exit
fi

# Define which initiators can use this target
tgt_acl=`get_acl $tid`
if test "$initiators" ; then
	# Allow access only for specific initiators
	echo "Accepting connections from $initiators"
	for initiator in $initiators; do
		# Check if record already exists
		if ((`echo $tgt_acl | grep -c "\b$initiator\b"` == 1)) ; then
			continue
		fi

		$TGTADM --lld $lld_name --op bind --mode target --tid $tid -I $initiator
		res=$?

		if [ $res -ne 0 ]; then
			echo "Error: could not assign initiator $initiator to the target"
		fi
	done
else
	# Check if record already exists
	if ((`echo $tgt_acl | grep -c "\bALL\b"` == 1)) ; then
		exit 0
	fi

	# Allow access for everyone
	echo "Accepting connections from all initiators"
	$TGTADM --lld $lld_name --op bind --mode target --tid $tid -I ALL
	res=$?

	if [ $res -ne 0 ]; then
		echo "Error: failed to set access for all initiators"
		err_exit
	fi
fi