/usr/share/doc/di-netboot-assistant/README.preseed is in di-netboot-assistant 0.51.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 | Preseeding and Automatic Installation
=======================================
Preseeding [1][2] provides a way to set answers to questions asked
during the installation process, without having to manually enter the
answers while the installation is running. This makes it possible to
fully automate installations.
To use preseeding with 'di-netboot-assistant', do the following:
• Provide a 'preseed.cfg' file. An example is available:
'/usr/share/doc/di-netboot-assistant/examples/preseed.cfg'.
Copy it to the directory $TFTP_ROOT/d-i/<CODENAME>/ of the release
you want to install. For example:
# mkdir -p /var/lib/tftpboot/d-i/stretch/
# cp /usr/share/doc/di-netboot-assistant/examples/preseed.cfg \
/var/lib/tftpboot/d-i/stretch/
• Modify it to fit your needs. You might want to modify the
partitioning and provide another (or no) public key for ssh. The
user's password provided should be changed after the installation.
• Enable the commented sections in:
'/etc/di-netboot-assistant/pxelinux.HEAD' and
'/etc/di-netboot-assistant/grub.cfg.HEAD'.
Run 'di-netboot-assistant rebuild-menu' to add the new boot entry
to the PXElinux and grub-efi menus.
• Make sure the TFTP server is resolved as 'installbox' (or modify
the boot parameter 'url=tftp://installbox' to fit your local
setup).
• Configure the DHCP server to provide a hostname for the client.
This hostname will be assigned to the host during installation.
If you use 'dnsmasq', the latter can be achieved by adding
corresponding lines in the host's '/etc/hosts' file.
The provided example 'preseed.cfg' configures ssh login for the user
'ansible' with public key authentication. This allows further
customization of the system after installation using ansible
playbooks. In addition, it shows how to apply a playbook already
during installation with 'ansible-pull'.
[1] <URL:https://wiki.debian.org/DebianInstaller/Preseed>
[2] <URL:https://www.debian.org/releases/stable/amd64/apb.html.en>
|