/usr/lib/installed-tests/libostree/libtest.sh is in ostree-tests 2018.4-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 | # Source library for shell script tests
#
# Copyright (C) 2011 Colin Walters <walters@verbum.org>
#
# SPDX-License-Identifier: LGPL-2.0+
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the
# Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
dn=$(dirname $0)
if [ -n "${G_TEST_SRCDIR:-}" ]; then
test_srcdir="${G_TEST_SRCDIR}/tests"
else
test_srcdir=$(dirname $0)
fi
if [ -n "${G_TEST_BUILDDIR:-}" ]; then
test_builddir="${G_TEST_BUILDDIR}/tests"
else
test_builddir=$(dirname $0)
fi
. ${test_srcdir}/libtest-core.sh
test_tmpdir=$(pwd)
# Sanity check that we're in a tmpdir that has
# just .testtmp (created by tap-driver for `make check`,
# or nothing at all (as ginstest-runner does)
if ! test -f .testtmp; then
files=$(ls)
if test -n "${files}"; then
ls -l
assert_not_reached "test tmpdir=${test_tmpdir} is not empty; run this test via \`make check TESTS=\`, not directly"
fi
# Remember that this is an acceptable test $(pwd), for the benefit of
# C and JS tests which may source this file again
touch .testtmp
fi
# Also, unbreak `tar` inside `make check`...Automake will inject
# TAR_OPTIONS: --owner=0 --group=0 --numeric-owner presumably so that
# tarballs are predictable, except we don't want this in our tests.
unset TAR_OPTIONS
# Don't flag deployments as immutable so that test harnesses can
# easily clean up.
export OSTREE_SYSROOT_DEBUG=mutable-deployments
export TEST_GPG_KEYID_1="472CDAFA"
export TEST_GPG_KEYID_2="CA950D41"
export TEST_GPG_KEYID_3="DF444D67"
# GPG when creating signatures demands a writable
# homedir in order to create lockfiles. Work around
# this by copying locally.
echo "Copying gpghome to ${test_tmpdir}"
cp -a "${test_srcdir}/gpghome" ${test_tmpdir}
chmod -R u+w "${test_tmpdir}"
export TEST_GPG_KEYHOME=${test_tmpdir}/gpghome
export OSTREE_GPG_HOME=${test_tmpdir}/gpghome/trusted
assert_has_setfattr() {
if ! which setfattr 2>/dev/null; then
fatal "no setfattr available to determine xattr support"
fi
}
_have_selinux_relabel=''
have_selinux_relabel() {
assert_has_setfattr
if test "${_have_selinux_relabel}" = ''; then
pushd ${test_tmpdir}
echo testlabel > testlabel.txt
selinux_xattr=security.selinux
if getfattr --encoding=base64 -n ${selinux_xattr} testlabel.txt >label.txt 2>err.txt; then
label=$(grep -E -e "^${selinux_xattr}=" < label.txt |sed -e "s,${selinux_xattr}=,,")
if setfattr -n ${selinux_xattr} -v ${label} testlabel.txt 2>err.txt; then
echo "SELinux enabled in $(pwd), and have privileges to relabel"
_have_selinux_relabel=yes
else
sed -e 's/^/# /' < err.txt >&2
echo "Found SELinux label, but unable to set (Unprivileged Docker?)"
_have_selinux_relabel=no
fi
else
sed -e 's/^/# /' < err.txt >&2
echo "Unable to retrieve SELinux label, assuming disabled"
_have_selinux_relabel=no
fi
popd
fi
test ${_have_selinux_relabel} = yes
}
# just globally turn off xattrs if we can't manipulate security xattrs; this is
# the case for overlayfs -- really, we should only enforce this for tests that
# use bare repos; separate from other tests that should check for user xattrs
# support
# see https://github.com/ostreedev/ostree/issues/758
# and https://github.com/ostreedev/ostree/pull/1217
echo -n checking for xattrs...
if ! have_selinux_relabel; then
export OSTREE_SYSROOT_DEBUG="${OSTREE_SYSROOT_DEBUG},no-xattrs"
export OSTREE_NO_XATTRS=1
fi
echo done
if test -n "${OT_TESTS_DEBUG:-}"; then
set -x
fi
# This is substituted by the build for installed tests
BUILT_WITH_ASAN=""
if test -n "${OT_TESTS_VALGRIND:-}"; then
CMD_PREFIX="env G_SLICE=always-malloc OSTREE_SUPPRESS_SYNCFS=1 valgrind -q --error-exitcode=1 --leak-check=full --num-callers=30 --suppressions=${test_srcdir}/glib.supp --suppressions=${test_srcdir}/ostree.supp"
else
# In some cases the LD_PRELOAD may cause obscure problems,
# e.g. right now it breaks for me with -fsanitize=address, so
# let's allow users to skip it.
if test -z "${OT_SKIP_READDIR_RAND:-}" && test -z "${BUILT_WITH_ASAN:-}"; then
CMD_PREFIX="env LD_PRELOAD=${test_builddir}/libreaddir-rand.so"
else
CMD_PREFIX=""
fi
fi
if test -n "${OSTREE_UNINSTALLED:-}"; then
OSTREE_HTTPD=${OSTREE_UNINSTALLED}/ostree-trivial-httpd
else
# trivial-httpd is now in $libexecdir by default, which we don't
# know at this point. Fortunately, libtest.sh is also in
# $libexecdir, so make an educated guess. If it's not found, assume
# it's still runnable as "ostree trivial-httpd".
if [ -x "${test_srcdir}/../../libostree/ostree-trivial-httpd" ]; then
OSTREE_HTTPD="${CMD_PREFIX} ${test_srcdir}/../../libostree/ostree-trivial-httpd"
else
OSTREE_HTTPD="${CMD_PREFIX} ostree trivial-httpd"
fi
fi
files_are_hardlinked() {
inode1=$(stat -c %i $1)
inode2=$(stat -c %i $2)
test -n "${inode1}" && test -n "${inode2}"
[ "${inode1}" == "${inode2}" ]
}
assert_files_hardlinked() {
if ! files_are_hardlinked "$1" "$2"; then
fatal "Files '$1' and '$2' are not hardlinked"
fi
}
setup_test_repository () {
mode=$1
shift
oldpwd=`pwd`
COMMIT_ARGS=""
if [ $mode == "bare-user-only" ] ; then
COMMIT_ARGS="--owner-uid=0 --owner-gid=0 --no-xattrs --canonical-permissions"
fi
cd ${test_tmpdir}
rm -rf repo
if test -n "${mode}"; then
ostree_repo_init repo --mode=${mode}
else
ostree_repo_init repo
fi
ot_repo="--repo=$(pwd)/repo"
export OSTREE="${CMD_PREFIX} ostree ${ot_repo}"
cd ${test_tmpdir}
local oldumask="$(umask)"
umask 022
rm -rf files
mkdir files
cd files
ot_files=`pwd`
export ht_files
ln -s nosuchfile somelink
echo first > firstfile
cd ${test_tmpdir}/files
$OSTREE commit ${COMMIT_ARGS} -b test2 -s "Test Commit 1" -m "Commit body first"
mkdir baz
echo moo > baz/cow
echo mooro > baz/cowro
chmod 600 baz/cowro
echo alien > baz/saucer
mkdir baz/deeper
echo hi > baz/deeper/ohyeah
echo hix > baz/deeper/ohyeahx
chmod 755 baz/deeper/ohyeahx
ln -s nonexistent baz/alink
mkdir baz/another/
echo x > baz/another/y
umask "${oldumask}"
cd ${test_tmpdir}/files
$OSTREE commit ${COMMIT_ARGS} -b test2 -s "Test Commit 2" -m "Commit body second"
$OSTREE fsck -q
cd $oldpwd
}
# A wrapper which also possibly disables xattrs for CI testing
ostree_repo_init() {
repo=$1
shift
${CMD_PREFIX} ostree --repo=${repo} init "$@"
if test -n "${OSTREE_NO_XATTRS:-}"; then
echo -e 'disable-xattrs=true\n' >> ${repo}/config
fi
}
# The original one; use setup_fake_remote_repo2 for newer code,
# down the line we'll try to port tests.
setup_fake_remote_repo1() {
mode=$1; shift
commit_opts=${1:-}
[ $# -eq 0 ] || shift
oldpwd=`pwd`
mkdir ostree-srv
cd ostree-srv
mkdir gnomerepo
ostree_repo_init gnomerepo --mode=$mode
mkdir gnomerepo-files
cd gnomerepo-files
echo first > firstfile
mkdir baz
echo moo > baz/cow
echo alien > baz/saucer
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/gnomerepo commit $commit_opts --add-metadata-string version=3.0 -b main -s "A remote commit" -m "Some Commit body"
mkdir baz/deeper
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/gnomerepo commit $commit_opts --add-metadata-string version=3.1 -b main -s "Add deeper"
echo hi > baz/deeper/ohyeah
mkdir baz/another/
echo x > baz/another/y
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/gnomerepo commit $commit_opts --add-metadata-string version=3.2 -b main -s "The rest"
cd ..
rm -rf gnomerepo-files
cd ${test_tmpdir}
mkdir ${test_tmpdir}/httpd
cd httpd
ln -s ${test_tmpdir}/ostree-srv ostree
${OSTREE_HTTPD} --autoexit --log-file $(pwd)/httpd.log --daemonize -p ${test_tmpdir}/httpd-port "$@"
port=$(cat ${test_tmpdir}/httpd-port)
echo "http://127.0.0.1:${port}" > ${test_tmpdir}/httpd-address
cd ${oldpwd}
export OSTREE="${CMD_PREFIX} ostree --repo=repo"
}
# Newer version of the above with more "real" data
setup_fake_remote_repo2() {
mode=$1
commit_opts=${2:-}
args=${3:-}
shift
oldpwd=`pwd`
mkdir ostree-srv
cd ostree-srv
mkdir repo
ostree_repo_init repo --mode=$mode
# Backcompat
ln -sr repo gnomerepo
# Initialize content
mkdir files
cd files
mkdir -p usr/{etc,bin,lib,share}
ln -sr usr/bin bin
ln -sr usr/lib lib
tar xf ${test_srcdir}/fah-deltadata-old.tar.xz
remote_ref=exampleos/42/x86_64/main
cd ..
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/repo commit \
--consume $commit_opts --add-metadata-string version=42.0 -b ${remote_ref} \
--tree=dir=files
test '!' -d files
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/repo checkout -U ${remote_ref} files
(cd files && tar xf ${test_srcdir}/fah-deltadata-new.tar.xz)
${CMD_PREFIX} ostree --repo=${test_tmpdir}/ostree-srv/repo commit \
--consume $commit_opts --add-metadata-string version=42.1 -b ${remote_ref} \
--tree=dir=files
# And serve via HTTP
cd ${test_tmpdir}
mkdir ${test_tmpdir}/httpd
cd httpd
ln -s ${test_tmpdir}/ostree-srv ostree
${OSTREE_HTTPD} --autoexit --log-file $(pwd)/httpd.log --daemonize -p ${test_tmpdir}/httpd-port $args
port=$(cat ${test_tmpdir}/httpd-port)
echo "http://127.0.0.1:${port}" > ${test_tmpdir}/httpd-address
cd ${oldpwd}
export OSTREE="${CMD_PREFIX} ostree --repo=repo"
}
setup_os_boot_syslinux() {
# Stub syslinux configuration
mkdir -p sysroot/boot/loader.0
ln -s loader.0 sysroot/boot/loader
touch sysroot/boot/loader/syslinux.cfg
# And a compatibility symlink
mkdir -p sysroot/boot/syslinux
ln -s ../loader/syslinux.cfg sysroot/boot/syslinux/syslinux.cfg
}
setup_os_boot_uboot() {
# Stub U-Boot configuration
mkdir -p sysroot/boot/loader.0
ln -s loader.0 sysroot/boot/loader
touch sysroot/boot/loader/uEnv.txt
# And a compatibility symlink
ln -s loader/uEnv.txt sysroot/boot/uEnv.txt
}
setup_os_boot_grub2() {
grub2_options=$1
mkdir -p sysroot/boot/grub2/
ln -s ../loader/grub.cfg sysroot/boot/grub2/grub.cfg
export OSTREE_BOOT_PARTITION="/boot"
case "$grub2_options" in
*ostree-grub-generator*)
cp ${test_srcdir}/ostree-grub-generator ${test_tmpdir}
chmod +x ${test_tmpdir}/ostree-grub-generator
export OSTREE_GRUB2_EXEC=${test_tmpdir}/ostree-grub-generator
;;
esac
}
setup_os_repository () {
mode=$1
shift
bootmode=$1
shift
bootdir=${1:-usr/lib/modules/3.6.0}
oldpwd=`pwd`
cd ${test_tmpdir}
mkdir testos-repo
if test -n "$mode"; then
ostree_repo_init testos-repo --mode=${mode}
else
ostree_repo_init testos-repo
fi
cd ${test_tmpdir}
mkdir osdata
cd osdata
kver=3.6.0
mkdir -p usr/bin ${bootdir} usr/lib/modules/${kver} usr/share usr/etc
kernel_path=${bootdir}/vmlinuz
initramfs_path=${bootdir}/initramfs.img
# /usr/lib/modules just uses "vmlinuz", since the version is in the module
# directory name.
if [[ $bootdir != usr/lib/modules/* ]]; then
kernel_path=${kernel_path}-${kver}
initramfs_path=${bootdir}/initramfs-${kver}.img
fi
echo "a kernel" > ${kernel_path}
echo "an initramfs" > ${initramfs_path}
bootcsum=$(cat ${kernel_path} ${initramfs_path} | sha256sum | cut -f 1 -d ' ')
export bootcsum
# Add the checksum for legacy dirs (/boot, /usr/lib/ostree-boot), but not
# /usr/lib/modules.
if [[ $bootdir != usr/lib/modules/* ]]; then
mv ${kernel_path}{,-${bootcsum}}
mv ${initramfs_path}{,-${bootcsum}}
fi
echo "an executable" > usr/bin/sh
echo "some shared data" > usr/share/langs.txt
echo "a library" > usr/lib/libfoo.so.0
ln -s usr/bin bin
cat > usr/etc/os-release <<EOF
NAME=TestOS
VERSION=42
ID=testos
VERSION_ID=42
PRETTY_NAME="TestOS 42"
EOF
echo "a config file" > usr/etc/aconfigfile
mkdir -p usr/etc/NetworkManager
echo "a default daemon file" > usr/etc/NetworkManager/nm.conf
mkdir -p usr/etc/testdirectory
echo "a default daemon file" > usr/etc/testdirectory/test
${CMD_PREFIX} ostree --repo=${test_tmpdir}/testos-repo commit --add-metadata-string version=1.0.9 -b testos/buildmaster/x86_64-runtime -s "Build"
# Ensure these commits have distinct second timestamps
sleep 2
echo "a new executable" > usr/bin/sh
${CMD_PREFIX} ostree --repo=${test_tmpdir}/testos-repo commit --add-metadata-string version=1.0.10 -b testos/buildmaster/x86_64-runtime -s "Build"
cd ${test_tmpdir}
cp -a osdata osdata-devel
cd osdata-devel
mkdir -p usr/include
echo "a development header" > usr/include/foo.h
${CMD_PREFIX} ostree --repo=${test_tmpdir}/testos-repo commit --add-metadata-string version=1.0.9 -b testos/buildmaster/x86_64-devel -s "Build"
${CMD_PREFIX} ostree --repo=${test_tmpdir}/testos-repo fsck -q
cd ${test_tmpdir}
mkdir sysroot
export OSTREE_SYSROOT=sysroot
${CMD_PREFIX} ostree admin init-fs sysroot
if test -n "${OSTREE_NO_XATTRS:-}"; then
echo -e 'disable-xattrs=true\n' >> sysroot/ostree/repo/config
fi
${CMD_PREFIX} ostree admin os-init testos
case $bootmode in
"syslinux")
setup_os_boot_syslinux
;;
"uboot")
setup_os_boot_uboot
;;
*grub2*)
setup_os_boot_grub2 "${bootmode}"
;;
esac
cd ${test_tmpdir}
mkdir ${test_tmpdir}/httpd
cd httpd
ln -s ${test_tmpdir} ostree
${OSTREE_HTTPD} --autoexit --daemonize -p ${test_tmpdir}/httpd-port
port=$(cat ${test_tmpdir}/httpd-port)
echo "http://127.0.0.1:${port}" > ${test_tmpdir}/httpd-address
cd ${oldpwd}
}
os_repository_new_commit ()
{
boot_checksum_iteration=${1:-0}
content_iteration=${2:-0}
branch=${3:-testos/buildmaster/x86_64-runtime}
echo "BOOT ITERATION: $boot_checksum_iteration"
cd ${test_tmpdir}/osdata
kver=3.6.0
if test -f usr/lib/modules/${kver}/vmlinuz; then
bootdir=usr/lib/modules/${kver}
else
if test -d usr/lib/ostree-boot; then
bootdir=usr/lib/ostree-boot
else
bootdir=boot
fi
fi
rm ${bootdir}/*
kernel_path=${bootdir}/vmlinuz
initramfs_path=${bootdir}/initramfs.img
if [[ $bootdir != usr/lib/modules/* ]]; then
kernel_path=${kernel_path}-${kver}
initramfs_path=${bootdir}/initramfs-${kver}.img
fi
echo "new: a kernel ${boot_checksum_iteration}" > ${kernel_path}
echo "new: an initramfs ${boot_checksum_iteration}" > ${initramfs_path}
bootcsum=$(cat ${kernel_path} ${initramfs_path} | sha256sum | cut -f 1 -d ' ')
export bootcsum
if [[ $bootdir != usr/lib/modules/* ]]; then
mv ${kernel_path}{,-${bootcsum}}
mv ${initramfs_path}{,-${bootcsum}}
fi
echo "a new default config file" > usr/etc/a-new-default-config-file
mkdir -p usr/etc/new-default-dir
echo "a new default dir and file" > usr/etc/new-default-dir/moo
echo "content iteration ${content_iteration}" > usr/bin/content-iteration
version=$(date "+%Y%m%d.${content_iteration}")
${CMD_PREFIX} ostree --repo=${test_tmpdir}/testos-repo commit --add-metadata-string "version=${version}" -b $branch -s "Build"
cd ${test_tmpdir}
}
_have_user_xattrs=''
have_user_xattrs() {
assert_has_setfattr
if test "${_have_user_xattrs}" = ''; then
touch test-xattrs
if setfattr -n user.testvalue -v somevalue test-xattrs 2>/dev/null; then
_have_user_xattrs=yes
else
_have_user_xattrs=no
fi
rm -f test-xattrs
fi
test ${_have_user_xattrs} = yes
}
# Usage: if ! skip_one_without_user_xattrs; then ... more tests ...; fi
skip_one_without_user_xattrs () {
if ! have_user_xattrs; then
echo "ok # SKIP - this test requires xattr support"
return 0
else
return 1
fi
}
skip_without_user_xattrs () {
if ! have_user_xattrs; then
skip "this test requires xattr support"
fi
}
# Skip unless SELinux is disabled, or we can relabel.
# Default Docker has security.selinux xattrs, but returns
# EOPNOTSUPP when trying to set them, even to the existing value.
# https://github.com/ostreedev/ostree/pull/759
# https://github.com/ostreedev/ostree/pull/1217
skip_without_no_selinux_or_relabel () {
if ! have_selinux_relabel; then
skip "this test requires xattr support"
fi
}
# https://brokenpi.pe/tools/strace-fault-injection
_have_strace_fault_injection=''
have_strace_fault_injection() {
if test "${_have_strace_fault_injection}" = ''; then
if strace -P ${test_srcdir}/libtest-core.sh -e inject=read:retval=0 cat ${test_srcdir}/libtest-core.sh >out.txt &&
test '!' -s out.txt; then
_have_strace_fault_injection=yes
else
_have_strace_fault_injection=no
fi
rm -f out.txt
fi
test ${_have_strace_fault_injection} = yes
}
skip_one_without_strace_fault_injection() {
if ! have_strace_fault_injection; then
echo "ok # SKIP this test requires strace fault injection"
return 0
fi
return 1
}
skip_without_fuse () {
fusermount --version >/dev/null 2>&1 || skip "no fusermount"
capsh --print | grep -q 'Bounding set.*[^a-z]cap_sys_admin' || \
skip "No cap_sys_admin in bounding set, can't use FUSE"
[ -w /dev/fuse ] || skip "no write access to /dev/fuse"
[ -e /etc/mtab ] || skip "no /etc/mtab"
}
skip_without_experimental () {
if ! ostree --version | grep -q -e '- experimental'; then
skip "No experimental API is compiled in"
fi
}
has_gpgme () {
${CMD_PREFIX} ostree --version > version.txt
assert_file_has_content version.txt '- gpgme'
rm -f version.txt
true
}
libtest_cleanup_gpg () {
gpg-connect-agent --homedir ${test_tmpdir}/gpghome killagent /bye || true
}
is_bare_user_only_repo () {
grep -q 'mode=bare-user-only' $1/config
}
# Given a path to a file in a repo for a ref, print its checksum
ostree_file_path_to_checksum() {
repo=$1
ref=$2
path=$3
$CMD_PREFIX ostree --repo=$repo ls -C $ref $path | awk '{ print $5 }'
}
# Given an object checksum, print its relative file path
ostree_checksum_to_relative_object_path() {
repo=$1
checksum=$2
if grep -Eq -e '^mode=archive' ${repo}/config; then suffix=z; else suffix=''; fi
echo objects/${checksum:0:2}/${checksum:2}.file${suffix}
}
# Given a path to a file in a repo for a ref, print the (relative) path to its
# object
ostree_file_path_to_relative_object_path() {
repo=$1
ref=$2
path=$3
checksum=$(ostree_file_path_to_checksum $repo $ref $path)
test -n "${checksum}"
ostree_checksum_to_relative_object_path ${repo} ${checksum}
}
# Given a path to a file in a repo for a ref, print the path to its object
ostree_file_path_to_object_path() {
repo=$1
ref=$2
path=$3
relpath=$(ostree_file_path_to_relative_object_path $repo $ref $path)
echo ${repo}/${relpath}
}
# Assert ref $2 in repo $1 has checksum $3.
assert_ref () {
assert_streq $(${CMD_PREFIX} ostree rev-parse --repo=$1 $2) $3
}
# Assert no ref named $2 is present in repo $1.
assert_not_ref () {
if ${CMD_PREFIX} ostree rev-parse --repo=$1 $2 2>/dev/null; then
fatal "rev-parse $2 unexpectedly succeeded!"
fi
}
|