/usr/share/perl5/Bio/Tools/Run/Alignment/Lagan.pm is in libbio-perl-run-perl 1.6.9-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 | # BioPerl module for Bio::Tools::Run::Alignment::Lagan
#
# Please direct questions and support issues to <bioperl-l@bioperl.org>
#
# Cared for by Bioperl
#
# Copyright Bioperl, Stephen Montgomery <smontgom@bcgsc.bc.ca>
#
# Special thanks to Jason Stajich.
#
# You may distribute this module under the same terms as perl itself
# POD documentation - main docs before the code
=head1 NAME
Bio::Tools::Run::Alignment::Lagan - Object for the local execution of the LAGAN suite of tools (including MLAGAN for multiple sequence alignments)
=head1 SYNOPSIS
use Bio::Tools::Run::Alignment::Lagan;
@params =
('chaos' => "The contents of this string will be passed as args to chaos",
#Read you chaos README file for more info/This functionality
#has not been tested and will be integrated in future versions.
'order' => "\"-gs -7 -gc -2 -mt 2 -ms -1\"",
#Where gap start penalty of- 7, gap continue of -2, match of 2,
#and mismatch of -1.
'recurse' => "\"(12,25),(7,25),(4,30)"\",
#A list of (wordlength,score cutoff) pairs to be used in the
#recursive anchoring
'tree' => "\"(sample1 (sample2 sample3))"\",
#Used by mlagan / tree can also be passed when calling mlagan directly
#SCORING PARAMETERS FOR MLAGAN:
'match' => 12,
'mismatch' => -8,
'gapstart' => -50,
'gapend' => -50,
'gapcont' => -2,
);
=head1 DESCRIPTION
To run mlagan/lagan, you must have an environment variable that points to
the executable directory with files lagan.pl etc.
"LAGAN_DIR=/opt/lagan_executables/"
Simply having the executables in your path is not supported because the
executables themselves only work with the environment variable set.
All lagan and mlagan parameters listed in their Readmes can be set
except for the mfa flag which has been turned on by default to prevent
parsing of the alignment format.
TO USE LAGAN:
my $lagan = Bio::Tools::Run::Alignment::Lagan->new(@params);
my $report_out = $lagan->lagan($seq1, $seq2);
A SimpleAlign object is returned.
TO USE MLAGAN:
my $lagan = Bio::Tools::Run::Alignment::Lagan->new();
my $tree = "(($seqname1 $seqname2) $seqname3)";
my @sequence_objs; #an array of bioperl Seq objects
##If you use an unblessed seq array
my $seq_ref = \@sequence_objs;
bless $seq_ref, "ARRAY";
my $report_out = $lagan->mlagan($seq_ref, $tree);
A SimpleAlign object is returned
Only basic mlagan/lagan functionality has been implemented due to the
iterative development of their project. Future maintenance upgrades
will include enhanced features and scoring.
=head1 FEEDBACK
=head2 Mailing Lists
User feedback is an integral part of the evolution of this and other
Bioperl modules. Send your comments and suggestions preferably to
the Bioperl mailing list. Your participation is much appreciated.
bioperl-l@bioperl.org - General discussion
http://bioperl.org/wiki/Mailing_lists - About the mailing lists
=head2 Support
Please direct usage questions or support issues to the mailing list:
I<bioperl-l@bioperl.org>
rather than to the module maintainer directly. Many experienced and
reponsive experts will be able look at the problem and quickly
address it. Please include a thorough description of the problem
with code and data examples if at all possible.
=head2 Reporting Bugs
Report bugs to the Bioperl bug tracking system to help us keep track
of the bugs and their resolution. Bug reports can be submitted via the
web:
http://redmine.open-bio.org/projects/bioperl/
=head1 AUTHOR - Stephen Montgomery
Email smontgom@bcgsc.bc.ca
Genome Sciences Centre in beautiful Vancouver, British Columbia CANADA
=head1 CONTRIBUTORS
MLagan/Lagan is the hard work of Michael Brudno et al.
Sendu Bala bix@sendu.me.uk
=head1 APPENDIX
The rest of the documentation details each of the object methods.
Internal methods are usually preceded with a _
=cut
package Bio::Tools::Run::Alignment::Lagan;
use strict;
use Bio::Root::IO;
use Bio::Seq;
use Bio::SeqIO;
use Bio::AlignIO;
use Bio::SimpleAlign;
use File::Spec;
use Bio::Matrix::IO;
use Cwd;
use base qw(Bio::Tools::Run::WrapperBase);
our @LAGAN_PARAMS = qw(chaos order recurse mfa out lazy maskedonly
usebounds rc translate draft info fastreject);
our @OTHER_PARAMS = qw(outfile);
our @LAGAN_SWITCHES = qw(silent quiet);
our @MLAGAN_PARAMS = qw(nested postir translate lazy verbose tree match mismatch
gapstart gapend gapcont out version);
#Not all of these parameters are useful in this context, care
#should be used in setting only standard ones
#The LAGAN_DIR environment variable must be set
our $PROGRAM_DIR = $ENV{'LAGAN_DIR'} || '';
sub new {
my($class, @args) = @_;
my $self = $class->SUPER::new(@args);
$self->_set_from_args(\@args, -methods => [@LAGAN_PARAMS, @OTHER_PARAMS,
@LAGAN_SWITCHES, @MLAGAN_PARAMS],
-create => 1);
my ($tfh, $tempfile) = $self->io->tempfile();
my $outfile = $self->out || $self->outfile || $tempfile;
$self->out($outfile);
close($tfh);
undef $tfh;
return $self;
}
=head2 lagan
Runs the Lagan pairwise alignment algorithm
Inputs should be two PrimarySeq objects.
Returns an SimpleAlign object / preloaded with the tmp file of the
Lagan multifasta output.
=cut
sub lagan {
my ($self, $input1, $input2) = @_;
$self->io->_io_cleanup();
my $executable = 'lagan.pl';
#my (undef, $tempfile) = $self->io->tempfile();
#$self->out($tempfile);
my ($infile1, $infile2) = $self->_setinput($executable, $input1, $input2);
my $lagan_report = &_generic_lagan( $self,
$executable,
$infile1,
$infile2 );
}
=head2 mlagan
Runs the Mlagan multiple sequence alignment algorithm.
Inputs should be an Array of Primary Seq objects and a Phylogenetic Tree in
String format or as a Bio::Tree::TreeI compliant object.
Returns an SimpleAlign object / preloaded with the tmp file of the Mlagan
multifasta output.
=cut
sub mlagan {
my ($self, $input1, $tree) = @_;
$self->io->_io_cleanup();
my $executable = 'mlagan';
if ($tree && ref($tree) && $tree->isa('Bio::Tree::TreeI')) {
# fiddle tree so mlagan will like it
my %orig_ids;
foreach my $node ($tree->get_nodes) {
my $seq_id = $node->name('supplied');
$seq_id = $seq_id ? shift @{$seq_id} : ($node->node_name ? $node->node_name : $node->id);
$orig_ids{$seq_id} = $node->id;
$node->id($seq_id);
}
# convert to string
my $tree_obj = $tree;
$tree = $tree->simplify_to_leaves_string;
# more fiddling
$tree =~ s/ /_/g;
$tree =~ s/"//g;
$tree =~ s/,/ /g;
# unfiddle the tree object
foreach my $node ($tree_obj->get_nodes) {
$node->id($orig_ids{$node->id});
}
}
my $infiles;
($infiles, $tree) = $self->_setinput($executable, $input1, $tree);
my $lagan_report = &_generic_lagan ( $self,
$executable,
$infiles,
$tree );
}
=head2 nuc_matrix
Title : nuc_matrix
Usage : my $matrix_obj = $obj->nuc_matrix();
-or-
$obj->nuc_matrix($matrix_obj);
-or-
$obj->nuc_matrix($matrix_file);
Function: Get/set the substitution matrix for use by mlagan. By default the
file $LAGAN_DIR/nucmatrix.txt is used by mlagan. By default this
method returns a corresponding Matrix.
Returns : Bio::Matrix::Mlagan object
Args : none to get, OR to set:
Bio::Matrix::MLagan object
OR
filename of an mlagan substitution matrix file
NB: due to a bug in mlagan 2.0, the -nucmatrixfile option does not
work, so this Bioperl wrapper is unable to simply point mlagan to
your desired matrix file (or to a temp file generated from your
matrix object). Instead the $LAGAN_DIR/nucmatrix.txt file must
actually be replaced. This wrapper will make a back-up copy of that
file, write the new file in its place, then revert things back to the
way they were after the alignment has been produced. For this reason,
$LAGAN_DIR must be writable, as must $LAGAN_DIR/nucmatrix.txt.
=cut
sub nuc_matrix {
my ($self, $thing, $gap_open, $gap_continue) = @_;
if ($thing) {
if (-e $thing) {
my $min = Bio::Matrix::IO->new(-format => 'mlagan',
-file => $thing);
$self->{_nuc_matrix} = $min->next_matrix;
}
elsif (ref($thing) && $thing->isa('Bio::Matrix::Mlagan')) {
$self->{_nuc_matrix} = $thing;
}
else {
$self->throw("Unknown kind of thing supplied, '$thing'");
}
$self->{_nuc_matrix_set} = 1;
}
unless (defined $self->{_nuc_matrix}) {
# read the program default file
my $min = Bio::Matrix::IO->new(-format => 'mlagan',
-file => File::Spec->catfile($PROGRAM_DIR, 'nucmatrix.txt'));
$self->{_nuc_matrix} = $min->next_matrix;
}
$self->{_nuc_matrix_set} = 1 if defined wantarray;
return $self->{_nuc_matrix};
}
=head2 _setinput
Title : _setinput
Usage : Internal function, not to be called directly
Function: Create input file(s) for Lagan executables
Returns : name of files containing Lagan data input /
or array of files and phylo tree for Mlagan data input
=cut
sub _setinput {
my ($self, $executable, $input1, $input2) = @_;
my ($fh, $infile1, $infile2, $temp1, $temp2, $seq1, $seq2);
$self->io->_io_cleanup();
SWITCH: {
if (ref($input1) =~ /ARRAY/i) {
##INPUTS TO MLAGAN / WILL hAVE TO BE CHANGED IF LAGAN EVER
##SUPPORTS MULTI-INPUT
my @infilearr;
foreach $seq1 (@$input1) {
($fh, $infile1) = $self->io->tempfile();
my $temp = Bio::SeqIO->new( -fh => $fh,
-format => 'Fasta' );
unless ($seq1->isa("Bio::PrimarySeqI")) {
return 0;
}
$temp->write_seq($seq1);
close $fh;
undef $fh;
push @infilearr, $infile1;
}
$infile1 = \@infilearr;
last SWITCH;
}
elsif ($input1->isa("Bio::PrimarySeqI")) {
##INPUTS TO LAGAN
($fh, $infile1) = $self->io->tempfile();
#Want to make sure their are no white spaces in sequence.
#Happens if input1 is taken from an alignment.
my $sequence = $input1->seq();
$sequence =~ s/\W+//g;
$input1->seq($sequence);
$temp1 = Bio::SeqIO->new( -fh => $fh,
-format => 'Fasta' );
$temp1->write_seq($input1);
close $fh;
undef $fh;
last SWITCH;
}
}
SWITCH2: {
if (ref($input2)) {
if ($input2->isa("Bio::PrimarySeqI")) {
($fh, $infile2) = $self->io->tempfile();
#Want to make sure their are no white spaces in
#sequence. Happens if input2 is taken from an
#alignment.
my $sequence = $input2->seq();
$sequence =~ s/\W+//g;
$input2->seq($sequence);
$temp2 = Bio::SeqIO->new( -fh => $fh,
-format => 'Fasta' );
$temp2->write_seq($input2);
close $fh;
undef $fh;
last SWITCH2;
}
} else {
$infile2 = $input2;
##A tree as a scalar has been passed, pass it through
}
}
return ($infile1, $infile2);
}
=head2 _generic_lagan
Title : _generic_lagan
Usage : internal function not called directly
Returns : SimpleAlign object
=cut
sub _generic_lagan {
my ($self, $executable, $input1, $input2) = @_;
my $param_string = $self->_setparams($executable);
my $lagan_report = &_runlagan($self, $executable, $param_string,
$input1, $input2);
}
=head2 _setparams
Title : _setparams
Usage : Internal function, not to be called directly
Function: Create parameter inputs for (m)Lagan program
Returns : parameter string to be passed to Lagan
Args : Reference to calling object and name of (m)Lagan executable
=cut
sub _setparams {
my ($self, $executable) = @_;
my (@execparams, $nucmatrixfile);
if ($executable eq 'lagan.pl') {
@execparams = @LAGAN_PARAMS;
}
elsif ($executable eq 'mlagan') {
@execparams = @MLAGAN_PARAMS;
if ($self->{_nuc_matrix_set}) {
# we create this file on every call because we have no way of
# knowing if user altered the matrix object
(my $handle, $nucmatrixfile) = $self->io->tempfile();
my $mout = Bio::Matrix::IO->new(-format => 'mlagan',
-fh => $handle);
$mout->write_matrix($self->nuc_matrix);
$self->{_nucmatrixfile} = $nucmatrixfile;
}
}
##EXPAND OTHER LAGAN SUITE PROGRAMS HERE
my $param_string = $self->SUPER::_setparams(-params => [@execparams],
-dash => 1);
$param_string .= " -nucmatrixfile $nucmatrixfile" if $nucmatrixfile;
return $param_string . " -mfa ";
}
=head2 _runlagan
Title : _runlagan
Usage : Internal function, not to be called directly
Function: makes actual system call to (m)Lagan program
Example :
Returns : Report object in the SimpleAlign object
=cut
sub _runlagan {
my ($self, $executable, $param_string, $input1, $input2) = @_;
my ($lagan_obj, $exe);
if ( ! ($exe = $self->executable($executable))) {
return;
}
my $version = $self->version;
my $command_string;
if ($executable eq 'lagan.pl') {
$command_string = $exe . " " . $input1 . " " . $input2 . $param_string;
}
if ($executable eq 'mlagan') {
$command_string = $exe;
foreach my $tempfile (@$input1) {
$command_string .= " " . $tempfile;
}
if (defined $input2) {
$command_string .= " -tree " . "\"" . $input2 . "\"";
}
$command_string .= " " . $param_string;
my $matrix_file = $self->{_nucmatrixfile};
if ($version <= 3 && $matrix_file) {
# mlagan 2.0 bug-workaround
my $orig = File::Spec->catfile($PROGRAM_DIR, 'nucmatrix.txt');
-e $orig || $self->throw("Strange, $orig doesn't seem to exist");
system("cp $orig $orig.bk") && $self->throw("Backup of $orig failed: $!");
system("cp $matrix_file $orig") && $self->throw("Copy of $matrix_file -> $orig failed: $!");
}
}
if (($self->silent || $self->quiet) &&
($^O !~ /os2|dos|MSWin32|amigaos/)) {
$command_string .= ' > /dev/null 2> /dev/null';
}
# will do brute-force clean up of junk files generated by lagan
my $cwd = cwd();
opendir(my $cwd_dir, $cwd) || $self->throw("Could not open the current directory '$cwd'!");
my %ok_files;
foreach my $thing (readdir($cwd_dir)) {
if ($thing =~ /anch/) {
$ok_files{$thing} = 1;
}
}
closedir($cwd_dir);
$self->debug("$command_string\n");
my $status = system(($version <= 3 ? '_POSIX2_VERSION=1 ' : '').$command_string); # temporary hack whilst lagan script 'rechaos.pl' uses obsolete sort syntax
if ($version <= 1 && $self->{_nucmatrixfile}) {
my $orig = File::Spec->catfile($PROGRAM_DIR, 'nucmatrix.txt');
system("mv $orig.bk $orig") && $self->warn("Restore of $orig from $orig.bk failed: $!");
}
opendir($cwd_dir, $cwd) || $self->throw("Could not open the current directory '$cwd'!");
foreach my $thing (readdir($cwd_dir)) {
if ($thing =~ /anch/) {
unlink($thing) unless $ok_files{$thing};
}
}
closedir($cwd_dir);
my $outfile = $self->out();
my $align = Bio::AlignIO->new( '-file' => $outfile,
'-format' => 'fasta' );
my $aln = $align->next_aln();
return $aln;
}
=head2 executable
Title : executable
Usage : my $exe = $lagan->executable('mlagan');
Function: Finds the full path to the 'lagan' executable
Returns : string representing the full path to the exe
Args : [optional] name of executable to set path to
[optional] boolean flag whether or not warn when exe is not found
Thanks to Jason Stajich for providing the framework for this subroutine
=cut
sub executable {
my ($self, $exename, $exe, $warn) = @_;
$exename = 'lagan.pl' unless defined $exename;
if ( defined $exe && -x $exe ) {
$self->{'_pathtoexe'}->{$exename} = $exe;
}
unless ( defined $self->{'_pathtoexe'}->{$exename} ) {
my $f = $self->program_path($exename);
$exe = $self->{'_pathtoexe'}->{$exename} = $f if(-e $f && -x $f );
unless( $exe ) {
if ( ($exe = $self->io->exists_exe($exename)) && -x $exe ) {
$self->{'_pathtoexe'}->{$exename} = $exe;
} else {
$self->warn("Cannot find executable for $exename") if $warn;
$self->{'_pathtoexe'}->{$exename} = undef;
}
}
}
# even if its executable, we still need the environment variable to have
# been set
if (! $PROGRAM_DIR) {
$self->warn("Environment variable LAGAN_DIR must be set, even if the lagan executables are in your path");
$self->{'_pathtoexe'}->{$exename} = undef;
}
return $self->{'_pathtoexe'}->{$exename};
}
=head2 program_path
Title : program_path
Usage : my $path = $lagan->program_path();
Function: Builds path for executable
Returns : string representing the full path to the exe
Thanks to Jason Stajich for providing the framework for this subroutine
=cut
sub program_path {
my ($self,$program_name) = @_;
my @path;
push @path, $self->program_dir if $self->program_dir;
push @path, $program_name .($^O =~ /mswin/i ?'':'');
# Option for Windows variants / None so far
return Bio::Root::IO->catfile(@path);
}
=head2 program_dir
Title : program_dir
Usage : my $dir = $lagan->program_dir();
Function: Abstract get method for dir of program. To be implemented
by wrapper.
Returns : string representing program directory
Thanks to Jason Stajich for providing the framework for this subroutine
=cut
sub program_dir {
$PROGRAM_DIR;
}
=head2 version
Title : version
Usage : my $version = $lagan->version;
Function: returns the program version
Returns : number
Args : none
=cut
sub version {
my $self = shift;
my $exe = $self->executable('mlagan') || return;
open(my $VER, "$exe -version 2>&1 |") || die "Could not open command '$exe -version'\n";
my $version;
while (my $line = <$VER>) {
($version) = $line =~ /(\d+\S+)/;
}
close($VER) || die "Could not complete command '$exe -version'\n";
return $version;
}
1;
|