dpdk-dev 2.2.0-0ubuntu7 / usr / share / dpdk / x86_64-default-linuxapp-gcc / .config

# BSD LICENSE
# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
# All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# BSD LICENSE
# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
# All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# * Neither the name of Intel Corporation nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
CONFIG_RTE_EXEC_ENV="linuxapp"
CONFIG_RTE_EXEC_ENV_LINUXAPP=y
##
## machine can define specific variables or action for a specific board
## RTE_MACHINE can be:
## default nothing specific
## native current machine
## atm Intel® Atom™ microarchitecture
## nhm Intel® microarchitecture code name Nehalem
## wsm Intel® microarchitecture code name Westmere
## snb Intel® microarchitecture code name Sandy Bridge
## ivb Intel® microarchitecture code name Ivy Bridge
##
## Note: if your compiler does not support the relevant -march options,
## it will be compiled with whatever latest processor the compiler supports!
##
#CONFIG_RTE_MACHINE="default"
##
## define the architecture we compile for.
## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
##
#CONFIG_RTE_ARCH="x86_64"
#CONFIG_RTE_ARCH_X86_64=y
##
## The compiler we use.
## Can be gcc, icc or clang.
##
#CONFIG_RTE_TOOLCHAIN="gcc"
#CONFIG_RTE_TOOLCHAIN_GCC=y
# Use intrinsics or assembly code for key routines
CONFIG_RTE_FORCE_INTRINSICS=n
# Machine forces strict alignment constraints.
CONFIG_RTE_ARCH_STRICT_ALIGN=n
# Compile to share library
CONFIG_RTE_BUILD_SHARED_LIB=y
# Combine to one single library
CONFIG_RTE_BUILD_COMBINE_LIBS=y
# Use newest code breaking previous ABI
CONFIG_RTE_NEXT_ABI=n
# Compile Environment Abstraction Layer
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_LOG_LEVEL=8
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=y
CONFIG_RTE_MALLOC_DEBUG=n
# Default driver path (or "" to disable)
CONFIG_RTE_EAL_PMD_PATH=""
# Special configurations in PCI Config Space for high performance
CONFIG_RTE_PCI_CONFIG=n
CONFIG_RTE_PCI_EXTENDED_TAG=""
CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
# Compile Environment Abstraction Layer for linux
CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
# Compile Environment Abstraction Layer to support Vmware TSC map
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
# Compile the argument parser library
CONFIG_RTE_LIBRTE_KVARGS=y
# Compile generic ethernet library
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
# Support NIC bypass logic
CONFIG_RTE_NIC_BYPASS=n
# Compile burst-oriented IGB & EM PMD drivers
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
# Compile burst-oriented IXGBE PMD driver
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
# Compile burst-oriented I40E PMD driver
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# interval up to 8160 us, aligned to 2 (or default value)
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
# Compile burst-oriented FM10K PMD
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
# Compile burst-oriented Broadcom PMD driver
CONFIG_RTE_LIBRTE_BNX2X_PMD=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
CONFIG_RTE_LIBRTE_CXGBE_PMD=y
CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
# Compile burst-oriented Cisco ENIC PMD driver
CONFIG_RTE_LIBRTE_ENIC_PMD=y
CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
# Compile burst-oriented Netronome NFP PMD driver
CONFIG_RTE_LIBRTE_NFP_PMD=n
CONFIG_RTE_LIBRTE_NFP_DEBUG=n
# Compile software PMD backed by SZEDATA2 device
CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
# Compile burst-oriented VIRTIO PMD driver
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
# Compile burst-oriented VMXNET3 PMD driver
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
# Compile example software rings based PMD
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
# Compile software PMD backed by PCAP files
CONFIG_RTE_LIBRTE_PMD_PCAP=y
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
# Compile software PMD backed by AF_PACKET sockets (Linux only)
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
# Compile Xen PMD
CONFIG_RTE_LIBRTE_PMD_XENVIRT=y
# Compile null PMD
CONFIG_RTE_LIBRTE_PMD_NULL=y
# Do prefetch of packet data within PMD driver receive function
CONFIG_RTE_PMD_PACKET_PREFETCH=y
# Compile generic crypto device library
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
CONFIG_RTE_CRYPTODEV_NAME_LEN=64
# Compile PMD for QuickAssist based devices
CONFIG_RTE_LIBRTE_PMD_QAT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
# Number of sessions to create in the session memory pool
# on a single QuickAssist device.
CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
# Compile PMD for AESNI backed device
CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
# Compile librte_ring
CONFIG_RTE_LIBRTE_RING=y
CONFIG_RTE_LIBRTE_RING_DEBUG=n
CONFIG_RTE_RING_SPLIT_PROD_CONS=n
CONFIG_RTE_RING_PAUSE_REP_COUNT=0
# Compile librte_mempool
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
# Compile librte_mbuf
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128
# Compile librte_mbuf_offload
# EXPERIMENTAL: API may change without prior notice
CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
# Compile librte_timer
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
# Compile librte_cfgfile
CONFIG_RTE_LIBRTE_CFGFILE=y
# Compile librte_cmdline
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
# Compile librte_hash
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n
# Compile librte_jobstats
CONFIG_RTE_LIBRTE_JOBSTATS=y
# Compile librte_lpm
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n
# Compile librte_acl
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n
# Compile librte_power
CONFIG_RTE_LIBRTE_POWER=y
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
# Compile librte_net
CONFIG_RTE_LIBRTE_NET=y
# Compile librte_ip_frag
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
# Compile librte_meter
CONFIG_RTE_LIBRTE_METER=y
# Compile librte_sched
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_DEBUG=n
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
CONFIG_RTE_SCHED_VECTOR=n
# Compile the distributor library
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
# Compile the reorder library
CONFIG_RTE_LIBRTE_REORDER=y
# Compile librte_port
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n
# Compile librte_table
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n
# Compile librte_pipeline
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n
# Compile librte_kni
CONFIG_RTE_LIBRTE_KNI=y
CONFIG_RTE_KNI_KMOD=n
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
CONFIG_RTE_KNI_KO_DEBUG=n
CONFIG_RTE_KNI_VHOST=n
CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
# Compile vhost library
# fuse-devel is needed to run vhost-cuse.
# fuse-devel enables user space char driver development
# vhost-user is turned on by default.
CONFIG_RTE_LIBRTE_VHOST=y
CONFIG_RTE_LIBRTE_VHOST_USER=y
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
#Compile Xen domain0 support
CONFIG_RTE_LIBRTE_XEN_DOM0=n
# Enable warning directives
CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
# Compile the test application
CONFIG_RTE_APP_TEST=n
# Compile the PMD test application
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
CONFIG_RTE_MACHINE="default"
CONFIG_RTE_ARCH="x86_64"
CONFIG_RTE_ARCH_X86_64=y
CONFIG_RTE_ARCH_64=y
CONFIG_RTE_TOOLCHAIN="gcc"
CONFIG_RTE_TOOLCHAIN_GCC=y